Palpation Palmer Practice Exam

These questions are part of the practice quiz. Start practicing

• What is the PP of spinous wiggle?
• Static palpation is used to assess structures in which position?
• What is the SCP for thoracic extension?
• Which hand is designated the stabilizing hand (SH) during cervical extension palpation?
• What is the DS of spinous wiggle?
• Which hand is designated as the superior hand (SH) in thoracic extension?
• Which hand acts as the contact hand (CH) in lumbar extension?
• What is the primary goal of a chiropractor?
• In relation to the neutral zone, what does passive range of motion do?
• What is the PP for atlas rotation?
• Where is the SCP located for thoracic extension?
• How should cervical lateral bending present?
• What is the stabilization contact point of sacroiliac fluid motion?
• What is the contact hand?
• Which term best describes the path of movement for atlas rotation?
• In sacroiliac fluid motion, which structure is used as CP?
• What is the DS for cervical rotation?
• Which bones are the SCP for occiput extension?
• Is the knee raiser test motion passive or active?
• Where is the patient positioned relative to the examiner during the knee raiser test?
• The spine of the scapula is aligned with which thoracic vertebral level?
• Which pelvic motion palpation procedure is on the x-axis of the right-handed coordinate system?
• What is the end-play zone?
• Which joint's motion should be symmetric bilaterally during circumduction assessment?
• What is the CP for occiput extension?
• Which anatomical landmark is the SCP for Thompson sacral check?
• Which statement describes occiput rotation's presentation?
• Which statement best describes the stabilization contact point (SCP) for thoracolumbar lateral bending?
• What type of motion is observed during thoracic extension?
• What is the stabilization contact point for atlas rotation?
• What is the contact point (CP) for lumbar extension?
• Which hand is designated as the CH (contact hand) for thoracolumbar lateral bending?
• What type of motion is occiput lateral bending?
• What type of motion is atlas lateral bending?
• Where is the axis transverse process located?
• During the three-finger palpation, which landmark does the ring finger contact?
• For occiput rotation in palpation Palmer technique, which hand functions as the contact hand (CH)?
• Which statement correctly describes how the contact for rotation is applied to the spinous process?
• In occiput lateral bending, what do CH and SH refer to?
• The transverse/horizontal plane corresponds to which axis?
• Which option identifies CP in palpation Palmer terminology?
• During thoracic extension, how do the thoracic spinous processes present?
• In the spinous wiggle palpation, which anatomical structure is used as the SP?
• What should be observed during vertebral pressure findings?
• Where is the stabilization contact point located for cervical lateral bending?
• Where is the SCP for the knee raiser test located?
• Which option best describes the setup for thoracolumbar rotation technique?
• Which statement correctly pairs the spinal region with its typical curvature?
• Which of the following is a subtype of motion palpation?
• During a chiropractic adjustment, the paraphysiological space may produce what release?
• What is the DS for leg fanning?
• How should occiput rotation present?
• Motion palpation is used to determine changes in what?
• Passive motion palpation is performed by?
• Which statement is true about the cervical rotation setup?
• Which axis is associated with lateral bending movements?
• When does the end-play zone typically begin?
• For thoracic extension, which is the CP (contact point) used?
• What is the stabilization contact point for circumduction?
• Where is the atlas transverse process located?
• Which plane is associated with the x-axis?
• Which statement about the DS stands true?
• Which of the following is another subtype of motion palpation?
• Which of the following best describes the primary objective of spinous wiggle?
• In the three-finger palpation method, which finger contacts the axis transverse process?
• For occiput rotation, which option describes the starting position?
• In the right hand coordinate system, which axis does the index finger point along?
• During cervical rotation, what is the spinous process movement relative to contact?
• Which statement correctly matches the role of S2 tubercle in Thompson sacral check?
• How should lateral bending of the atlas present?
• What is the doctor stance (DS) for cervical extension palpation?
• What is the pelvis position (PP) for leg fanning?
• Which statement best describes the PP for occiput lateral bending?
• Which statement best describes the DS for occiput lateral bending and occiput rotation?
• Where should you stand (DS) to stabilize during thoracolumbar rotation?
• Which motion is the z-axis responsible for?
• If a movement is rotation, which axis is it associated with?
• What landmark can be found using the inferior border of the scapula when the patient is seated?
• Breach of the anatomical limit can result in which injury?
• Which hand serves as the stabilization hand (SH) during thoracolumbar rotation?
• What is the patient position (PP) for performing cervical extension palpation?
• CP stands for?
• What is the PP for Thompson sacral check?
• What is the stabilization contact point (SCP) for lumbar extension?
• What is the CH for atlas rotation?
• Tissue pull is performed by drawing the skin in which direction?
• What is the PP for occiput lateral bending?
• TP stands for?
• What is the correct order of contact points from index finger to ring finger in the three-finger palpation technique for the upper cervical spine?
• In the rotation technique, which hand is the stabilization hand (SH)?
• SCP stands for?
• The SCP location for the knee raiser test is in which region?
• What is the DS for occiput rotation?
• In the three-finger palpation technique, which landmark does the middle finger contact?
• Which vertebral levels constitute the middle thoracic region?
• How should circumduction present?
• Where is the stabilization contact point (SCP) applied in the described rotation technique?
• Which digit pad is listed as a CP option for atlas lateral bending?
• What is the basic unit of spinal mobility?
• Which term describes the area on the patient used to stabilize during adjustment?
• Where is the stabilization contact point (SCP) located for lumbar extension?
• When using the right hand coordinate system, what axis is the middle finger?
• What is the CH for vertebral pressure?
• To locate a lower thoracic transverse process, how many interspinous spaces should you travel up, and how far laterally?
• Which statement identifies the CP for thoracic extension as being the pad of the 3rd digit?
• How should atlas rotation present?
• DS stands for?
• What is the accurate SCP for occiput rotation?
• Which term describes the zone of resistance as motion approaches the outer limit of passive motion?
• The stabilization contact point is achieved by lightly touching which area?
• Which hand is the SH (superior hand) in this palpation setup?
• Which statement correctly describes the DS for vertebral pressure?
• To locate a middle thoracic transverse process, how many interspinous spaces should you travel up, and how far laterally?
• During occiput extension, where is the stabilization contact placed?
• What is the CH for circumduction?
• What is the stabilization contact point used in Thompson sacral check?
• Which option correctly identifies the SH in cervical rotation?
• In occiput lateral bending, which hand provides the superior contact?
• What is the stabilization contact point for occiput lateral bending?
• What type of motion is vertebral pressure?
• Which hand acts as the contact hand (CH) for lumbar extension?
• Which choice correctly pairs the method to locate an upper thoracic transverse process with the required movement?
• In occiput lateral bending, what is the DS?
• What is the SCP for cervical extension?
• During cervical lateral bending, where is the distal segment stabilized?
• What is the stabilization hand?
• What is the most prominent thoracic spinous?
• When using the three-finger palpation trick for static palpation of the upper spine, the index finger is placed on which landmark?
• What type of curve is the lumbar spine?
• Which statement about stabilization during leg fanning is true?
• Which statement best describes the knee raiser test movement?
• Which statement best defines the contact hand (CH)?
• What type of motion is involved in thoracolumbar lateral bending?
• What is the SH of sacroiliac fluid motion?
• Which is the stabilization contact point for occiput lateral bending?
• What is the stabilization contact point for cervical rotation?
• Which statement describes the heel of hand as the contact point in Thompson sacral check?
• In sacroiliac fluid motion, which statement correctly describes the SCP?
• Palpation is part of ?
• Which of the following describes the CP for occiput extension?
• During rotation, how do the spinous processes move relative to the contact point on each side?
• What is the CP for atlas rotation? (two choices noted in source)
• Which acronym represents the stabilization area used during adjustment?
• What is the segmental stabilization point for spinous wiggle?
• What is the primary objective of reducing the vertebral subluxation complex?
• A hypomobile motion segment is defined as what?
• What is the DS for thoracic extension?
• What is the DS for Thompson sacral check?
• What is the neutral zone?
• A motion segment includes which components?
• In Thompson sacral check, which hand serves as the contact hand (CH)?
• What stabilization is required during leg fanning?
• In the three-finger palpation method, which finger is placed on the atlas transverse process?
• Where is the SCP placed during thoracolumbar lateral bending?
• What is the CP of sacroiliac fluid motion?
• What is the PP for vertebral pressure?
• What is the patient position for cervical lateral bending?
• For occiput rotation, which digit pad is used as the contact point (CP)?
• What is the contact point (CP) used for cervical extension palpation?
• What is the contact hand (CH) for leg fanning?
• Which structures form the SCP for occiput lateral bending?
• What is the SCP for leg fanning?
• What is the CH for occiput extension?
• For occiput rotation, which hand is designated as the superior hand (SH)?
• Which range of motion is used to determine the full extent of the neutral zone up to the elastic barrier?
• Active motion palpation is performed by?
• What is tissue pull?
• What is the SH for cervical rotation?
• Which plane is associated with the y-axis?
• What is meant by optimal nerve function in this context?
• How should lateral bending of the atlas present?
• The most protruding thoracic spinous process corresponds to which level?
• Which bony landmark is found around the hairline on the back of the neck?
• SSP stands for?
• What is the SCP for occiput extension?
• What is the segmental stabilization point for spinous wiggle?
• What type of motion is cervical extension?
• What is the contact hand (CH) used for thoracolumbar rotation?
• What is the SCP for occiput lateral bending?
• What is the stabilization contact point for atlas lateral bending?
• What is the anatomical limit?
• What is the DS for circumduction?
• To locate an upper thoracic transverse process, how would you move your palpation tool?
• Which of the following correctly matches the order of upper, middle, and lower thoracic regions to their vertebral levels?
• Where should the stabilization contact point be placed for cervical rotation?
• Which statement best describes the DS for circumduction?
• The coronal/frontal plane corresponds to which axis?
• How should rotation of the thoracic/lumbar spinous processes present?
• What is the CH for cervical rotation?
• Which motion is the x-axis responsible for?
• For atlas lateral bending, which direction describes the DS?
• What is the contact hand (CH) used for cervical extension palpation?
• Which option is listed as a CP for cervical rotation?
• In Thompson sacral check, what is the contact point (CP)?
• PB stands for?
• What landmark can be found using the spine of the scapula?
• The SI joint joint play should be equal bilaterally describes which concept?
• What is the stabilization contact point for occiput extension?
• Which structure is the SCP for spinous wiggle?
• What is the stabilization contact point for thoracic extension?
• What is the PP for circumduction?
• A motion segment consists of which structures?
• What is the paraphysiological space?
• The paraphysiological space lies just beyond which barrier?
• Which of the following statements about atlas rotation regarding anterior separation from the axis TVP is accurate?
• The sagittal plane corresponds to which axis?
• What is the CP for vertebral pressure?
• What is the PP for cervical rotation?
• What type of motion is circumduction?
• What is the CP for atlas lateral bending?
• What is the CP for atlas rotation? (two choices noted in source)
• Which option correctly identifies the CH in cervical rotation?
• In the right hand coordinate system, which axis does the thumb align with?
• Which hand serves as the initial contact hand (CH) for thoracic extension?
• Which digit pad is listed as a contact point for cervical lateral bending?
• For occiput rotation, what is the starting position (PP)?
• Which vertebral levels constitute the upper thoracic region?
• In circumduction, which option correctly identifies CH placement?
• What landmark can be found using the superior portion of the iliac crest?
• For sacroiliac fluid motion, which stabilization contact point is used?
• Tracing up from the 12th rib's angle identifies which vertebral level?
• What is used to locate a transverse process in the thoracic spine?
• Which vertebral level is commonly used as the hairline landmark on the back of the neck?
• Which statement correctly identifies the CP for thoracic extension?
• In Thompson sacral check, which hand is the stabilizing hand (SH)?
• How should the spinous processes present during thoracic/lumbar lateral bending relative to the contact?
• What is the contact point (CP) for the knee raiser test?
• The axis transverse process is located relative to the atlas transverse process as?
• SH stands for?
• What is the stabilization hand (SH) for atlas lateral bending?
• What is the positioning point (PP) for atlas lateral bending?
• What landmark can be found using the inferior border of the scapula when the patient is prone?
• Which hand serves as the stabilization hand (SH) for lumbar extension?
• Which pairing of contact hand and stabilizing hand is correct for cervical lateral bending?
• The anatomical limit corresponds to the upper limit of which space?
• In occiput rotation, which statement describes the Superior Hand (SH)?
• How should occiput rotation present?
• Which of the following is true about cervical rotation?
• Does the knee raiser test require stabilization?
• Which plane is associated with the z-axis?
• Which statement correctly describes leg fanning PSIS movement?
• What is the SH for atlas rotation?
• What is the SH for circumduction?
• What is the SCP for atlas lateral bending?
• Which pelvic motion palpation procedures are on the y-axis of the right-handed coordinate system?
• What is the DS of sacroiliac fluid motion?
• Which combination accurately describes lumbar extension technique?
• What type of motion is thoracolumbar rotation?
• What is the preferred position (PP) for performing thoracolumbar rotation?
• What is the PP of sacroiliac fluid motion?
• What is the SCP for atlas lateral bending?
• The TP for spinous wiggle indicates orientation described as?
• How should the knee raiser test present in terms of PSIS movement?
• Where is the DS for occiput extension?
• In thoracolumbar lateral bending palpation, what is the recommended patient posture (PP)?
• What kind of motion is leg fanning?
• In the three-finger palpation technique, which finger is the index finger?
• In palpation Palmer technique, CH stands for which term?
• Which hand acts as the contact hand for cervical lateral bending?
• The TP of spinous wiggle describes which orientation?
• Which term describes the location on the patient used for adjustment contact?
• How is joint play defined?
• During thoracolumbar lateral bending palpation, where is the DS (distance stance) positioned?
• What is the SCP for vertebral pressure?
• Which term is defined as the doctor's hand used to contact the segmental contact point on the patient?
• In relation to the neutral zone, what does active range of motion do?
• Which description best matches leg fanning motion?
• What is the DS for vertebral pressure?
• Which of the following best describes atlas rotation?
• What describes the contact-hand (CH) pattern for the knee raiser test?
• Which vertebral level is known as the axis?
• What is the DS for atlas rotation?
• Which digit pad is listed as a potential contact point for cervical lateral bending?
• During lateral bending, how do the spinous processes move relative to the contact point on both sides?
• What is the stabilization contact point for vertebral pressure?
• During cervical rotation, how should the spinous process move relative to the contact?
• EB stands for?
• What is the contact point (CP) used for leg fanning?
• Which barrier is encountered after the physiological barrier as motion continues toward the outer range?
• Which vertebra is identified by a prominent spinous process commonly palpated along the midline of the neck?
• What is the SCP of sacroiliac fluid motion?
• Which statement correctly identifies the SCP location?
• What type of motion is atlas lateral bending?
• PP stands for?
• Which position defines the patient posture for occiput extension?
• Which orientation should the fingers have on the contact point in Thompson sacral check?
• Which describes the occiput extension movement?
• Lack of end-play is usually due to what?
• What is the CP of spinous wiggle?
• For Thompson sacral check, which stance or approach is described for the DS?
• What type of motion is lumbar extension?
• Which hand acts as the stabilizing hand during cervical lateral bending?
• How should Thompson sacral check present?
• How should occiput extension present?
• In Thompson sacral check, which hand serves as the stabilizing hand (SH)?
• What is the SCP of circumduction?
• What is the patient position for lumbar extension?
• During the knee raiser test, which PSIS moves anterior and superior?
• Which statement about spinous wiggle is true?
• Where is the stabilization contact point located during cervical lateral bending?
• Who initiates movement in the knee raiser test?
• How should cervical extension present?
• The SCP is located on which aspects of the spinous process?
• What is a hypermobile motion segment?
• What is the stabilization contact point for occiput rotation?
• The inferior angle of the scapula helps identify which thoracic level when the patient is prone?
• In spinous wiggle palpation, which structure is used as the SP?
• Why do we palpate?
• Which description best characterizes the end-play zone?
• What is the SH for vertebral pressure?
• What is the stabilization contact point for atlas lateral bending?
• Which digit pad is listed as a CP option for occiput rotation?
• What type of curve is the thoracic spine?
• What type of motion is occiput extension?
• The end-play zone is typically felt as which tactile quality?
• What is the segmental stabilization point?
• Which statement about stabilization in the knee raiser test is true?
• Which statement describes the DS for cervical rotation?
• For atlas lateral bending, which hand is used as the contact hand (CH)?
• What is the SCP of spinous wiggle?
• What is the stabilization contact point for cervical extension?
• Which statement about the thoracic extension setup is true?
• What is the CP for circumduction?
• Which hand is the superior hand (SH) in thoracic extension?
• What is the SCP for cervical rotation?
• Which statement best describes the neutral zone?
• What type of palpation is used to assess structures in neutral position?
• What does VSC stand for in chiropractic terminology?
• Which term is not described as a type of palpation?
• What is the proper starting posture (PP) for thoracic extension?
• What is the SCP for atlas rotation?
• Which motion is the y-axis responsible for?
• The CP for lumbar extension is most commonly associated with which digit?
• What is the stabilization contact point (SCP) for thoracolumbar rotation?
• How do the lumbar spinous processes present during extension?
• PS stands for which term in palpation anatomy?
• What type of motion is cervical lateral bending?
• Which type of palpation determines changes in motion segments?
• What is the patient position for the knee raiser test?
• What is the contact point?
• What type of motion is cervical rotation?
• What is the SCP for Thompson sacral check?
• In occiput lateral bending, which hand provides the inferior contact?
• Which statement describes the vertebrae involved in atlas rotation?
• Which term best describes the motion used in thoracolumbar rotation?
• Which vertebral levels comprise the lower thoracic region?
• Which hand is used as the contact hand (CH) for thoracolumbar rotation?
• How should sacroiliac fluid motion present?
• Which hand serves as the CH for atlas lateral bending?
• Which term describes the contact point for spinous wiggle?
• Which is the CP for circumduction?
• Which statement correctly describes lumbar extension technique?
• What is the DS for atlas lateral bending?
• Which two vertebrae are involved in atlas rotation?
• Which cervical vertebra is identified by the larger, prominent bump on the back of the neck?
• What is the CH of sacroiliac fluid motion?